To have your ad listed, contact Adam Wolf.

•RX-7 - $1000
1984 mazda rx7, 5 speed stock and ready to go as a auto-x or road racing car:

alloy wheels
lsd diffrential
accel performance wires

asking $1000.00 obo

call Aaron 505-907-3518

•Spec Miata - $14900
Go to the Coloradoscca site for more details.

Lea

•Miata Stuff
Need some money extremely fast. I had a family emergency. I am selling the following:
99 OEM Mint condition wheels- $300 OBO
Mazdaspeed Miata Axelback- $250 OBO
Racing Helmet- $125 OBO

If interested, please email me at miata9cs@yahoo.com or call me at 505-730-4307. It may take a few hours to get back to you because of my current work schedule.
Brian Parlante

•2000 Civic chassis - $1500 OBO
The car is a 2000 Honda Civic Si in Milano Red. I'll list off what is still left on the car and what is not (From my couple hours of looking at it). The car is currently a rolling frame.

Still Left:
All the body panels (Hood, trunk, front and rear bumper (both of which are new), all the glass and doors)
Dashboard
Steering Wheel and what looks like the steering column and hydraulics.
Engine mount are still in the engine bay along with a lot of other stuff
Four wheel disc brakes are still there
Headlights

Missing:
B16a2 Engine
Transmission
Drivetrain
Exhaust
Rear Tail lights
Front bumper lip
All instrument clusters have been unplugged and removed (Looks like nothing was cut)
Radio
Interior (all seats and carpet are gone and door panels)
Window motors

Looking for $1500 but offers are welcome.

Daniel Spross
hobbes874@gmail.com
505-507-7246

• CRX wheels - $100
A set of four Honda CRX Si factory alloys. Four bolt pattern. Should fit Honda Civics as well. The rims are all straight and true, ready to run. $100.00 for the set.
Bob McCafferty
(505) 797-3677
rjmccaff@aol.com.

• Lots of BMW parts
FOR SALE: Miscelanious E30 (1987 325iS) performance parts. My well equipped, well cared for 325iS was totaled by a hit and run driver. I have removed some of the parts and offer them for sale here. I also have some other odds and ends; call if there is something you are looking for.

Ireland Engineering antisway bar complete kit, front and rear. All parts are in excellent condition. New price was $410.00. $200 OBO

Schroth Rally Harness and Stable Energies harness bar. May fit other models. The bar mounts on the B pillars between the two attach points for the shoulder strap of the stock three-point belts. It is adjustable so it may fit other models. The belts are four-point and do a good job of keeping the driver and passenger firmly planted during abrupt changes of direction or speed. All parts use stock attach points so no drilling or alteration of any kind is needed. The lap part of the belt uses the stock mounting points for the three-point setup. The shoulder straps go over the bar and attach to the rear seat belt attach points. The stock rear seat belts can be left in place and used as desired—but not when the four-point setup is in use. When using the stock belts simply push the shoulder belts under the rear seat and tuck the lap belts along side the front seats. The purpose of the harness bar is to prevent downward pressure on the spine in the event of a frontal impact, a very useful thing to do. $200 for all.

Ireland Engineering front and rear tower braces. In excellent condition. $200 for both; $115 each.

New timing belt. New oil filter. New air filter. $20 takes all, or OBO.

Stock steering wheel in excellent condition

Four SSR COMP 16 X 7” wheels with 225/50—16 Falken 615 tires mounted. Tires are about half used. One wheel was damaged by a piece of metal that passed through the tire and the part of the wheel that is parallel to the road. It was professionally repaired and the damage was well away from any spoke. Hardly shows. Wheels cost about $1200. Gun metal with polished lip. Four 10 mm spacers and longer wheel mounting bolts included. One of the tiny hub caps is missing, but should be easily obtained from Tire Rack where the tires and wheels were purchased. Wheels have minor scratches, etc., mostly from cones. $700 OBO.

JC chip. $150

Trailer hitch with receiver tongue. Excellent condition. Little use. Has been sitting in my shop for the past four years. All mounting hardware included.

Custom made five point harness setup for passenger and driver. Uses stock attach points except for should belts which attach to included and very solid steel bar that attaches to the stock attach point for the stock shoulder belts. Five point belts provide very firm support and stock belts can be left in place and used as desired. A small slit in the cloth between the seat and leg support is required to allow the lap belt to feed from its attach point to the release assembly. A very well made and well conceived setup. Highly recommended. $500 OBO.

E30 manual. Well used and shows traces of lubricants, but is intact and fully legible.

All of the above parts have been removed from the car and include all parts needed to install. You are welcome to remove other parts so long as the car retains the appearance of “being all there.”

Please act fast as the insurance company may decide that they want the car on fairly short notice. I would hate to see these parts go to the junk yard.

Joe Stephenson
graphicjoe@comcast.net
505 235-7295

• 91 NSX - $28,000
Well, I've finally gone and done it. I've upgraded to a 2002, which means that my beloved 1991 Acura NSX is up for sale.

Some of the details:
1991
62,XXX miles
Berlina Black exterior/ Ivory interior
I am looking to put her back to as close to stock as possible. The following modifications are included with the car:

JDM NSX transmission gearing
JDM NSX-R 4.23 ring and pinion
Centerforce clutch with Dali/Tilton lightweight flywheel
Konig 5-spoke 17'F/18"R wheels (THE VOLKS HAVE ALREADY BEEN SOLD)
OEM 15/16" wheels with used Kumho R-compounds and a brand new, unmounted set of Avon track tires.
Alpine 6-disc MP3 changer (works with OEM head unit)
Powerslot brake rotors
Hawk HPS brake pads

Not included in the price, but negotiable back into the deal:

Taitec headers
Random Technologies high-flow cats
Science of speed big-bore throttle body
Science of Speed tuned intake manifold
Science of Speed Stage I ECU
Sparco Roaster seats on Taitec seat rails
Gruppe M NSX Type S shift knob
Comptech harness bar
Simpson 5-point harnesses
Dali Racing carbon fiber side vents
TEIN RA coilovers

There are other mods done to the car, but they are coming off and getting transferred to the new one. The car is not in snap ring range.

All scheduled maintenance will have been done on the car, up to and including the timing belt/water pump that I am about to pay for. She has had paint work done (not from any major wrecks), and it was done very well. There are some rock chips on the front, as can be expected with any car like this being out on New Mexico roads. There are some places where she is starting to show her age, but she is in very good shape for a 1991 NSX and she is in excellent shape for a 15-year old car.

Price: 28K firm, which is less than a comparable NSX you'll find any where. My only stipulation to this price is that you are a good owner who will appreciate the car for what it is: a rare exotic.

Please e-mail Chuck Ferguson @ fergusoncr@earthlink.net for more details.

• Tires for sale - $250 OBO
15 x 6.5, 5-100/144mm bolt pattern, Konig Rated Race with 195/60R-15 Yokohama AVS ES100 Tires used for a couple thousand miles and one autocross. $700 new, will take $250 or make me an offer.
Jeff Wright
jdwrigh2000@yahoo.com